null

Quick & Easy Checkout

PDG Eclipse

(No reviews yet) Write a Review
SKU: PDEclipse

Regular Price: $3,067.65
Sale: $2,651.25
(You save $416.40 )

PDG Eclipse

(No reviews yet) Write a Review
SKU: PDEclipse

Regular Price: $3,067.65
Sale: $2,651.25
(You save $416.40 )
Regular Price: $3,067.65
Sale: $2,321.25
Regular Price: $3,067.65
Sale: $2,651.25
(You save $416.40 )
#1 Rated Mobility Provider
Free Shipping on Orders Over $100
100% Satisfaction Guarantee
Secure Ordering
ATP-Certified Staff Support
Financing Available

  • Description

    The Eclipse is a rigid manual wheelchair designed for bariatric users. Available in a wide array of sizes, the Eclipse supports up to 1000 lbs. Forward extended casters achieve optimal weight balance on the rear wheels for excellent maneuverability. Overall width is one of the narrowest available allowing for improved door clearance. Transit tie downs are now available up to 600 lbs. 

    Features

    • Tilt-in-space
    • Transportable
    • Forward Wheelchair
    • Adjustable Seat Depth and Back Angle
    • Narrow Overall Width

    PDG Mobility

    PDG Mobility was founded in Vancouver, Canada in 1995 with the mission to design and manufacture custom wheelchairs for users whose needs were not met by existing devices. Our comprehensive selection of unique chairs and our ability to customize any product facilitates a perfect fit every time, no matter how basic or complex the requirements are. Our designs continue to evolve, but at their core they will always focus on adaptability, durability, and dependability. We stand behind our chairs with a full life-time warranty on frames and our exclusive thank-goodness-it-fits guarantee.

  • Specs
    • Tilt-in-space
    • Steel
    • 44 lb. product weight
    • Seat Width 20" to 40"
    • Seat Depth 16" to 24"
    • Seat to Floor Height 14" to 20"
    • Weight Limit: 1000 lbs.
  • Size Chart / measuring guide
    manual-size-chart
    manual-size-chart
    manual-size-chart
    A-
    Seat Depth
    Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg.
    B-
    Back Height
    Measured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate.
    c-
    Rear Seat to Floor
    Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the wheelchair seat.
    D-
    Hanger Angle
    Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular
    E-
    Seat Width
    Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant.
    F-
    Wheel Camber
    Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber.
    G-
    Front Seat to Floor
    Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled.
    H-
    Footrest Width
    Measure from the inside of each leg rest tubing the distance or desired distance between leg rests.
    H-
    Footrest Width
    Measure from the inside of each leg rest tubing the distance or desired distance between leg rests.
    I-
    Center of Gravity
    Measure from the front of the seat back post to the center of the rear axle.
    J-
    Seat to Footrest Length
    Measure from the edge of the seat upholstery to the top rear of the footrest.
    K-
    Backrest Angle
    Measure the angle of the back post to the floor. Ninety degrees will be perpendicular to the floor, to approximate the angle from the back post to the seat, subtract two degrees from measurement for every .5" of dump
  • Warranty Information

    Limited Warranty

    This warranty is extended only to original consumer purchasers of our products. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state or province to province.

    PDG warrants products manufactured by PDG to be free from defects in materials and workmanship as follows: Parts and miscellaneous components for a period of one (1) year from date of purchase and wheelchair frames for life (applicable only to the original product user as entered on the wheelchair order form). If within such warranty period any such product shall be proven to the Manufacturer’s satisfaction to be defective, such product shall be repaired or replaced, at PDG’s option. This warranty does not include any labor or shipping charges incurred in replacement part installation or repair of any such product. PDG’s sole obligation and your exclusive remedy under this warranty shall be limited to such repair and/or replacement.

    For warranty service, contact the dealer from whom you purchased your product. In the event you do not receive satisfactory warranty service, please write directly to PDG, provide dealer’s name, address and date of purchase, and indicate nature of the defect. Also provide the product name and serial number. Do not return product to our factory without our prior consent.

    Limitations and Exclusions: The foregoing warranty shall not apply to serial numbered products if the serial number has been removed or defaced, products subjected to negligence, accident, improper operation, maintenance or storage, commercial or institutional use or other than normal application, use or service, or to products modified without the Manufacturer’s express written consent (including, but not limited to, modification through the use of unauthorized parts or attachments), or to products damaged by reason of repairs made to any component without the specific consent of PDG, or to products damaged by circumstances beyond PDG’s control.

    THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, IF ANY, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL NOT EXTEND BEYOND THE DURATION OF THE EXPRESS WARRANTY PROVIDED HEREIN AND THE REMEDY FOR VIOLATIONS OF ANY IMPLIED WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT PURSUANT TO THE TERMS CONTAINED HEREIN. PDG SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.

    THIS WARRANTY SHALL BE EXTENDED TO COMPLY WITH STATE/PROVINCIAL LAWS AND REQUIREMENTS.

You May Also Like…

x

You have accessed the BuildMyWheelchair.com website to request a consult with an Assistive Technology Professional (“ATP”) to perform a seating consult for your custom mobility needs. This consult will be conducted using Microsoft Teams with an ATP at a date and time that is convenient for you.

The ATP’s role is to assist you in ascertaining the type of wheelchair or mobility related equipment that may best fit your needs depending on your physician’s recommendations and the resources that may be available to you. Based on your input, the ATP will issue recommendations, but this consultation is not a representation or guarantee that the end product is exactly what you require or that it will meet all your needs. More importantly, Build My Wheelchair, LLC does not manufacture the specific parts or components that make up the wheelchair and, as such, we do not make any express or implied representations or warranties regarding the ultimate end product. If you subsequently have concerns about the functionality of your wheelchair or other mobility related products, Build My Wheelchair, LLC will review with you anything that is related to the assembly of your wheelchair, but we are not responsible for any specific product or component failures or malfunctions.

Please contact us at Contact@BuildMyWheelchair.com for questions regarding our services, the ATP consultation and other related items.