- This item is custom-made by the manufacturer to suit your specific needs . Please review all specifications carefully before placing your order. Once production of your item has begun – the order is unable to be cancelled.
- For hygienic safety and per FDA regulations this item is non-returnable, even if unused.
- Once products are installed, the product is no longer returnable.
- Please inspect your product upon delivery. If the product is damaged or incorrect, please call BuildmyWheelchair.com Customer Service.
-
Description
M2 Zero Elevation Seat Cushion
The M2 offers you advanced positioning support with its deep lateral and medial leg contours, while the tapered leg adductors give you pelvic stability. It is constructed with dual density foam, a molded foam base, and a QuadraGel pack to help regulate your body temperature and redistribute pressure for maximum comfort. It comes in two styles based on the support you need: Zero Elevation (same height from front to rear) and Anti-Thrust (with a mild “shelf” at the halfway point to minimize forward migration).
- Tapered leg adductors increase in width near the back of the cushion to give support to the greater trochanter.
- Deep lateral and medial leg contours promote postural alignment.
- Coccyx relief cutout eliminates pressure on the tailbone and spine.
- Non-skid bottom fabric offers hook and loop attachment.
- Constructed with dual density foam, a molded foam base, and Quadra3D® Gel pack.
Quadra3d Gel Pack
Key Benefits:
- Promotes postural alignment and pelvic stability
- Coccyx relief cutout minimizes peak pressures
- Upgrade available with an embedded GlideWear shear reduction zone in the cover
- Tapered leg adductors increase in width near the back of the cushion to give support to the greater trochanter.
- Deep lateral and medial leg contours promote postural alignment.
- Coccyx relief cutout eliminates pressure on the tailbone and spine.
- Non-skid bottom fabric offers hook and loop attachment.
- Constructed with dual density foam, a molded foam base, and Quadra3D® Gel pack.
- ZERO ELEVATION - The M2 Zero Elevation cushion allows for greater freedom of movement for standard positioning issues.
Glide WearA new cover option adapted from leading prosthetics technology, GlideWear is designed to promote healing and reduce the risk of Pressure Injury through the use of the Shear Reduction Zone.
GlideWear provides:- Reduction of shear forces to increase skin protection
- 100% breathability for microclimate control
- Improved comfort from reduced friction
BE SEEN, BE SAFE
Comfort Company backrests and cushions feature reflective piping to ensure we are doing our part to promote safety and protect the wheelchair user. Reflective piping has the ability to return a large portion of light directly back to the source it came from, allowing it to be seen from up to 500 feet away in low light conditions. Make sure you are visible.
STRETCH-AIR
Designed to be airy and breathable with a superior stretch. Stretch AirTM provides heat dissipation for comfort while the multi-directional stretch contributes to pressure relief by allowing the user to gain the full benefit of the back support or cushion design. Latex-free.
COMFORT-TEK
Designed for infection control and as an incontinence barrier, this Polyurethane material has a smooth and extremely soft top layer with a high-stretch Polyester backing. It is an easily cleaned surface using most common disinfectants. Latex free.
-
Specs
- Product Width (Standard): 10"-24"
- Product Depth (Standard): 10"-24"
- Seat Thickness 16"x14" and smaller- 3" 16"x16" and larger- 4.25"
- Inferior Thigh Support Thickness 16"x14" and smaller- 2.5" 16"x16" and larger- 3"
- Medial Thigh Support Height 16"x14" and smaller- .75" 16"x16" and larger- 1.25"
- Lateral Thigh Support Height 16"x14" and smaller- 1" 16"x16" and larger- 1.5"
- Pelvic Contour Height 16"x14" and smaller- 1" 16"x16" and larger- 1.5"
-
Size Chart / measuring guide
- Videos
-
Warranty Information
Comfort Company Warranty Information
This product is covered by the Comfort Company Lifetime Guarantee.
If a manufacturing defect should occur, the product will be replaced at no cost to the buyer. Register your product at www.comfortcompany. com/registration to activate Lifetime Guarantee.
If manufacturing defects should occur, discontinue use immediately.
Wear from regular use is not considered a manufacturing defect. Replacement parts are available by contacting Customer Service or your supplier, distributor, or retailer.
Any alterations made to the product or defects caused by irregular use voids the warranty.
Warranty claims should be filed by the original purchaser.
End-users will need to contact the DME Supplier, Distributor or Retailer from whom the product was purchased. In the event the original dealer is not available, any authorized Comfort Company DME supplier, distributor or retailer will provide assistance.
DME suppliers, distributors or retailers with warranty issues will need to contact Customer Service by phone or email and provide original purchase order number, sales order number, or invoice number whenever possible. A Return Merchandise Authorization (RMA) will be issued by Customer Service so a warranty replacement order or quote can be processed.
If you would like to contact us with your comments or concerns, please visit our website www.comfortcompany.com or refer to the "Contact Information" section of this manual.
Cushion Return Policy
This item is non-returnable for one of the following reasons:
Customer Reviews
1 Review Hide Reviews Show Reviews
-
Best cushion I’ve had in 22 years
I have tried so many cushions over the last 22 years and nothing even comes close to this cushion. The only other cushion I’ve tried that comes close to this is a Jay2, which is comfy but fairly heavy. I’ve used the comfort company ascent & curve, supracor stimulite contoured, varilite evolution, roho hybrid elite, the regular roho and the comfort company’s M2 is better than all of them.
