-
Description

TiLite CR1

The TiLite CR1 is a high-performance carbon fiber wheelchair designed for strength, speed, and efficiency. Its aerodynamic tube profile and foam-filled core provide maximum durability while keeping it ultra-lightweight.

KEY FEATURES:
• Exceptionally lightweight frame
• ± 1” Center of Gravity fine tuning adjustment
• Integrated, fold-down backrest for easy transport
• Individually made, just for youDual-Angled Front End An additional bend in the frame's downtube allows users to get up to 2" closer to other surfaces for easier transfers and allows improved access in tight areas.
Carbon Fiber Frame With an aerodynamic tube profile and a foam-filled core, the CR1’s carbon fiber frame has been designed for uncompromising performance and strength.
Integrated Fold-Down Backrest Custom-profiled side guards that act as structural members to the frame hold the backrest in place and allow you to fold down your backrest for easy transport.
Brandon Lyons, Paralympic Cycling National Team athlete"Compared to previous carbon fiber chairs I’ve had, the CR1’s weight makes it much easier to transfer into my vehicle, making it easier on my shoulders. In addition, the light weight and high responsiveness of the chair makes it much more efficient to push."

Carefully Crafted for True Innovation
Every single detail of the TiLite CR1 has been carefully designed to bring true innovation to TiLite. From specially designed caster bearings for vertical load application and weight reduction to new carbon fiber caster wheels and titanium reinforcement trim rings, this chair revolutionizes the idea of a manual wheelchair from the ground up.

SPECIFICATIONS
Frame Width: 13" - 18" Frame Depth: 13" - 18" Frame Style: Rigid Frame Type: Mono Tube Frame Construction: Carbon Fiber Front Frame Angle: 85° Front Seat Height: 17.5" - 21" Camber: 0°, 2°, 4°, Weight Capacity: 231lbs Transport Weight: 9lbs COLORS

-
Size Chart / measuring guide
A-Seat DepthMeasure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg.B-Back HeightMeasured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate.c-Rear Seat to FloorMeasurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the wheelchair seat.D-Hanger AngleDetermines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicularE-Seat WidthDetermined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant.F-Wheel CamberAngle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber.G-Front Seat to FloorMeasure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled.H-Footrest WidthMeasure from the inside of each leg rest tubing the distance or desired distance between leg rests.H-Footrest WidthMeasure from the inside of each leg rest tubing the distance or desired distance between leg rests.I-Center of GravityMeasure from the front of the seat back post to the center of the rear axle.J-Seat to Footrest LengthMeasure from the edge of the seat upholstery to the top rear of the footrest.K-Backrest AngleMeasure the angle of the back post to the floor. Ninety degrees will be perpendicular to the floor, to approximate the angle from the back post to the seat, subtract two degrees from measurement for every .5" of dump -
Warranty Information
Return Policy All items eligible for return have a Restocking Fee of 30%. For orders that incur a shipping cost, it will be excluded from the refund issued. You are responsible for the cost of return shipping and the product must be in the original packaging. The item must be in new, unused. Any sign of wear and tear will prevent a credit from happening. All products received in retail or manufacturer packaging must be returned in packaging. Return Windows Most items may request a return within 10 days of receipt for a refund. You are responsible for the cost of return shipping and the product must be in the original packaging. Any custom built item that is built to special specifications is ineligible for return. This includes but is not limited too; ultra lightweight wheelchairs, heavy duty wheelchairs, tilt and space wheelchairs, pediatric wheelchairs, outdoor/all terrain power wheelchairs, power elevating/recline/tilt power wheelchairs, rehab shower commode chairs, bathroom transfer systems, standing frames and gait trainers. Cushion Return Policy This item is non-returnable for one of the following reasons: This item is custom-made by the manufacturer to suit your specific needs. Please review all specifications. carefully before placing your order. Once production of your item has begun – the order is unable to be cancelled. For hygienic safety and per FDA regulations this item is non-returnable, even if unused. Once products are installed, the product is no longer returnable. Please inspect your product upon delivery. If the product is damaged or incorrect, please call BuildmyWheelchair.com Customer Service. Return Process Contact sales@buildmywheelchair.com to request a Return Authorization Number. This must be included on the package when returning. After the Return Authorization is granted, ship the item back to the address supplied from customer service within 14 days. Before a credit will be issued, the product will be inspected for damage and signs of use. If there are any signs of use shown on the product, Buildmywheechair.com will not be able to issue a refund. In the event your item is not returnable we will contact you and you can decide if you'd like it shipped back. You will be responsible for shipping fees to get the item back to you. Once approved, your refund, minus any restocking fees, will be refunded to your original form of payment. ALL returned products require a Return Authorization number. Returns received without this number will not be credited. Products returned without a Return Authorization number will not be credited. If product not received within 21 days of Return Authorization, no credit will be issued. Return Shipping Buildmywheechair.com can assist in picking the best return shipping option to use once- depending on the sizing of the package USPS will be the least expensive route for return. Custom Order Cancellation All custom orders will require a deposit of $2,500. Once a custom order has begun production, the $2,500 deposit fee will be ineligible for refund. Cancelled Orders If you cancel an order after the item has shipped, the order is subject to all return policies. You will need to follow the Return Authorization process in order receive any refund. If delivery is refused and not returned with an RA number, a refund minus the cost of shipping and restocking fee of 30% will be credited when item is returned and located. This may take an extended period depending on the return location. Credits If the full Return Authorization process is followed and your product is received in new condition, a credit will be issued to the payment type used for the purchase. Please allow up to 4 weeks for your credit to be issued. If you paid by check or money order, we will issue a check within 30 days. If your item is defective or was damaged in shipping, please contact the office at 1-844-269-4335 or email us at sales@buildmywheelchair.com. We will coordinate to have the item corrected or replaced as fast as possible.