SB3T - Roll-In ShowerBuddy with Tilt

(No reviews yet) Write a Review

SKU:

SB3T - Roll-In ShowerBuddy with Tilt

(No reviews yet) Write a Review

SKU: SB3-RBTilt

Package Includes 350 lb. weight capacity, Adjustable tilt angle from 0 -30 degrees, Low maintenance, Removable / lockable / foldaway arms Height adjustable Safety mechanisms Removable / swing away footrests, Full aluminum frame (Grade 6061 T6) Stainless steel hardware (Grade 304) Lap / chest belts / calf strap 5”lockingcastors, Commode system, Adjustable neck rest, Tool-less assembly, Rolls over standard / elongated toilets no more than 15.5" wide (measured at widest point, rim to rim)

Description
Roll-InBuddy Tilt SB3T

SB3T Roll-InBuddy Tilt was designed to help carers shower users with greater comfort and ease. Its tilt function is great for alleviating pressure from a seated position, and provides better access during bathing. Thanks to its lightweight frame and locking wheels, SB3T is simple and safe to transfer to and from the roll-in shower at home.

Roll-InBuddy Tilt can lean back with 30 degrees angle movement. The carer can control the tilt from either left or right hand side with an interchangeable tilt release lever. Included neck and feet rests help keep the user secure and comfortable during showering.

With its adjustable chair that fits over most standard home bathroom toilets and included commode bucket, SB3T is the complete bathroom mobility aid.

Roll-InBuddy Tilt SB3TAt a glance
- Safe Locking Wheels
- Flexible Tilt Function
- Lifetime Warranty on the Frame against corrosion
- Comes almost fully assembled, no tools required
- Designed for Roll-in Showers
- Comfortable Showering Experience
How it Works

Showering

Roll-InBuddy Tilt is designed for carers to help mobility impaired individuals shower more comfortably in a roll-in shower.
- Prepare the user for showering.
- Ensure the user is comfortable and safe with neck and feet rests adjusted and safety straps in place.
- Transfer the user into the roll-in shower with the rolling base.
- Lock the base onto the floor of the shower with locking caster wheels.
- Tilt release to lean back the user, taking pressure off legs.
- Once shower is complete, simply unlock the wheels and transfer out of the shower.
Toileting

The SB3T also offers complete toilet mobility assistance for a carer and user:
- Position the Roll-InBuddy Tilt chair over the home toilet. It may need to be height adjusted for clearance.
- SB3T locks in place with the locking caster wheels.
- After use, the SB3T can be cleaned easily thanks to non-corrosive, water-proof parts.
- The Roll-InBuddy Tilt also comes with a complete commode system for added flexibility.
Features
- Weight capacity – 160kg (350lb)
- Tilt angle 0-30 degrees, infinite positioning
- Rolls over most standard toilets
- Low maintenance
- Arms – removable / lockable / flip-back
- Height adjustable
- Footrests – removable and swing-away, height-adjustable
- No rust aluminium frame (Grade 6061 T6)
- Stainless steel parts and hardware (Grade 304)
- Safety belts – lap & chest belts plus calf strap
- Caster Wheels – 125mm (5") x 4 locking
- Commode system
- Neck rest, fully adjustable
- Tool-free assembly
Specifications
- Chair Width – over caster wheels 490mm (19.25")
- Chair Width – over arms 570mm (22.5")
- Chair Width – inside arms 475mm (18.75") – smaller users see accessory pages
- Chair Length – including footrest 1060mm (42") (940mm or 37" with footrests fitted inwards)
- Chair Tilt 0-30 degrees with infinite positioning and lock
- Backrest Width 460mm (18")
- Backrest Height from Cushion to top 440mm (17.5")
- Toilet Height clearance (maximum) 535mm (21")
- Toilet Width clearance at narrowest 375mm (at casters)
- Toilet clearance can depend upon the shape of the toilet pan
- Seat Cushion Dimensions 460mm W x 430mm D
- Seat Height from Floor 510mm to 610mm (Adjustable)
- Seat Cushion Opening 175mm W x 335mm L
- Box Dimensions L 840mm x W 580mm x H 760mm
- Box Gross Weight 27.4kg
Size Chart / measuring guide

A-
Seat Depth

Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg.

B-
Back Height

Measured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate.

c-
Rear Seat to Floor

Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the wheelchair seat.

D-
Hanger Angle

Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular

E-
Seat Width

Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant.

F-
Wheel Camber

Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber.

G-
Front Seat to Floor

Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled.

H-
Footrest Width

Measure from the inside of each leg rest tubing the distance or desired distance between leg rests.

H-
Footrest Width

Measure from the inside of each leg rest tubing the distance or desired distance between leg rests.

I-
Center of Gravity

Measure from the front of the seat back post to the center of the rear axle.

J-
Seat to Footrest Length

Measure from the edge of the seat upholstery to the top rear of the footrest.

K-
Backrest Angle

Measure the angle of the back post to the floor. Ninety degrees will be perpendicular to the floor, to approximate the angle from the back post to the seat, subtract two degrees from measurement for every .5" of dump
Videos
Videos Hide Videos Show Videos
- ShowerBuddy SB3t Roll-in Buddy with Tilt
  
  The ShowerBuddy SB3T roll-in shower chair is for accessible or...
Warranty Information

ShowerBuddy Warranty
2 Year Limited Warranty:
Showerbuddy warrants our Showerbuddy Transfer Systems and all Showerbuddy products for two years from the date of purchase by the consumer. The warranty will only become active once the consumer submits the warranty registration card to the company with a copy of the purchase receipt. This warranty covers defects in materials and workmanship on all Showerbuddy products except those listed in the Warranty Exclusions below:

Warranty Exclusions

-Product or parts failure from normal wear and tear

-Damage caused by failure to adhere to the User’s Manual

-Damage from improper installation, use or repair

-Brake line that operates the handbrake / tilt mechanism on tilting chairs (SB2T and SB3T)

-Improper use of the hand ratchet that is used in adjusting the neck support / adjustment

-Seat cushions and arm rests

Limitations

-The warranty is VOID if the original serial number tag is removed or altered.

-The warranty is VOID if the unit sustains damage from unnatural causes.

-The warranty is VOID if the unit is used to hold more than the weight limit of 300 pounds (140kg).

-The warranty is VOID if the unit has been subjected to neglect, improper maintenance, storage, cleaning or operation as defined in the User’s Manual.

-The warranty is VOID if the unit is modified without Showerbuddy’s written consent.

-This warranty applies to the original purchaser only, from the date of the purchase, provided a registration card has been submitted to the company within 60 days of purchase.

Your Responsibilities

-If your unit requires warranty service, please contact the dealer from which you purchased the Showerbuddy unit.

-If you do not receive satisfactory dealer service, contact Showerbuddy at the address below.

-Do not return the unit to Showerbuddy without first obtaining a Return Authorization Number from Customer Service.

-A defective unit must be shipped to Showerbuddy within 14 days of issuance of a Return Authorization Number by Customer Service.

Showerbuddy's Responsibilities

-Showerbuddy’s sole responsibility is to repair or replace, at their discretion, the covered components of the unit. This is the exclusive remedy for consequential or incidental damages.

-Upon pre-approval, Showerbuddy may provide exchange services for Warranty returns. Under this program, a refurbished Showerbuddy unit may be shipped after the return of the defective unit. The exchange unit may contain used parts that meet Showerbuddy quality standards. This program is provided at the sole discretion of Showerbuddy. The original warranty term will not be extended due to such a unit exchange and a return unit will become the property of Showerbuddy.