Beasy "Easy Grasp" Transfer Board

Description
Beasy “Easy Grasp” 2200P
The long length of the “Easy Grasp” #2200P Standard Plastic Transfer Board makes it easy to transfer, even into a car.

Created with thick and strong HDPE plastic with an ultra-smooth surface that makes it easy to slide across the board, and easy to clean. The vertical and horizontal notches can be switched by turning the board around so you can use it in the way which best suits you, to assist in getting the board under or from beneath the patient. A No Slip Pad is added free so you can use your board with no slipping with hard surface to hard surface transfers.

Transferring patients or loved ones can be very difficult and dangerous if not done so properly. That makes the Beasy Transfer Board an essential tool for any caregiver or less mobile individual; making transfers significantly easier and safer.

Our Beasy premium gliding transfer boards are an amazing product that work for most transfers, however, there are some patients that have medical needs that may require a more standard option. If your client has issues with certain types of dementia or phobias of movement, a standard board may be a better option for them. The new plastic transfer boards are strong and have a longer durable life than most standard wood boards, especially in excessive heat and humidity. Beasy standard plastic transfer boards can be cleaned quickly and easily with any sanitizing cleanser.

EASY, SAFE AND SECURE transfers make these devices a first choice among caregivers and users alike. They are used to help a person easily and safely move from a wheelchair, bed, chair, sofa, commode or other sitting position while minimizing user and caregiver strain or injury.

Some models offer easy grip cutouts for extra leverage with a safe and secure grip for individuals as they slide across the board. The cutouts are large enough to accommodate even extra-large hands, while maintaining the structural integrity to hold up to 500 lbs. Each handle has been rounded for comfort.

HDPE plastic makes these boards the easiest to clean of all transfer boards. Just sanitize with your favorite non-abrasive cleanser and rinse well. No fuss or unnecessary time consumed.
- Strong construction is long-lasting, antimicrobial, and easy to clean.
- Smooth, coated surface is comfortable for bare skin transfers.
- High-density polyethylene plastic (HDPE) is durable and hygienic.
- Safe and easy transfers for a variety of applications.
Scratch Disclaimer:

Plastic Transfer boards can and will scratch when used on hard surfaces. It is important to always use the board with the bottom side down so that the bottom surface is the only one that comes in contact with other hard surfaces. This will keep the top of your transfer board smooth and safe for tender skin.

Safe from Sliding:

To keep your transfer board from sliding when hard surface is in contact with another hard surface, you can put a towel or piece of rubber in between the surfaces. Make sure the board is very stable before any transfer is made.

SPECIFICATIONS:

Length: 35″
Width: 8.5″
Thickness: .5″
Weight: 5.11 lbs.
Material: HDPE Plastic

Transfer Weight: Up to 350 lbs

We offer a great line of carry cases and bags to make toting or storing your BeasyTrans products, accessories or personal belongings easy. These attractive cases are lightweight and made out of strong 600D polyester with reinforced handles and zipper opening. Velcro straps inside the bag keep the boards in place.

Most cases offer models with, and without convenient wheelchair handle loops that make it easier to carry your transfer system in its case, on the back of the wheelchair. This allows the caregiver to use both hands to better control the chair.

Optional Accesories:
Size Chart / measuring guide

A-
Seat Depth

Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg.

B-
Back Height

Measured from the seat base to the top of the chair back. Power wheelchair riders need upper back support, particularly for the moment of initial acceleration.

C-
Hanger Angle

Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the electric power wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular.

D-
Seat Width

Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant.

E-
Front Seat to Floor

Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Electric power wheelchairs are almost never footpropelled by the user - so excluding the additional two-inch footrest height for propelling is very rare.
Warranty Information
If the product you received is damaged or not what you expected it to be, and want to return the item, please submit a return request to our Customer Service department via email us at contact@buildmywheelchair.com for return instructions and to receive a return authorization number. All items must be returned in their original packaging, including any documentation, and must be in new, re-sellable condition. Any custom built item that is built to special specifications is ineligible for return. This includes but is not limited too; ultra lightweight wheelchairs, heavy duty wheelchairs, tilt and space wheelchairs, pediatric wheelchairs, outdoor/all terrain power wheelchairs, power elevating/recline/tilt power wheelchairs, rehab shower commode chairs, bathroom transfer systems, standing frames and gait trainers. For hygiene reasons, all seat cushions, back cushions, positioning components and any items that have been in “skin contact” are ineligible for return. Buildmywheelchair.com must be notified within 48 hours of delivery for any damage or request for return on any product eligible for return. Once notification of return has been completed, merchandise must be returned within 30 days of the receipt of order. No returns are accepted after 30 days. Returns will be reviewed and inspected before issuing credit. A restocking fee of 30% will apply to items eligible for return and will require approval from product manufacturer before credit or reimbursement. Shipping charges will be deducted from your refund if you have us assist in return shipping. Allow 2 to 4 weeks to process the credit and it will be applied to your credit card or original method of payment.

Customer Reviews

1 Review Hide Reviews Show Reviews

5
Slide board

Posted by Jerome Schexnayder on Jul 19th 2022

Best board ever